FAQs for Vector Molds

We accept all major credit cards through the website. If you contact us directly, we also accept PayPal, Apple Pay, Venmo, bank check and wire transfers.

For smaller orders, we ship the same day or the next. For larger quantities, it takes 2-3 business days per 10 molds.

Yes, we ship worldwide

Returns can solely be accommodated in cases of manufacturing defects. 

Should you come across any defects or have any other inquiries regarding your order, please don't hesitate to contact us at info@vectormolds.com.

We also have a 18 month guarantee that the mold will not break or tear. If the product does not stand the test of time, we will take the product back and replace it with a brand new mold.

Check out our full return policy.

For in-stock silicone molds, there is no minimum or maximum order quantity. You can order as few or as many molds as your production requires.

For Custom Molds Orders, there is a minimum order of 20 molds. This is due to the design, engineering, and master mold production involved in creating a custom mold.

If you’re unsure what quantity is right for your operation, feel free to contact our team—we’re happy to help you plan the best setup for your production.

Yes. If a state is listed in our product description, it means the gummy meets that state's regulations.

However, we always suggest double-checking with your state to ensure there haven’t been any recent changes. If you have questions or don’t see your state listed, feel free to contact us at info@vectormolds.com!

Yes, Vector Molds offers bulk pricing for larger orders. Bulk orders typically start around 30 molds, though this can vary depending on the specific mold design and production requirements.

If you’re planning a larger run, we recommend reaching out to our team with your quantity and mold details. We’ll provide accurate pricing, lead times, and help you choose the best mold format for your production. Reach out to us.

Yes, Vector Molds are oven safe and freezer safe, with a temperature range of approximately -40°F to 446°F (-40°C to 230°C). This makes them suitable for baking, cooling, and a wide range of confectionery applications.

They are especially well-suited for repeated heat-to-cold cycles, such as depositing and setting processes used in gummy and chocolate production, helping maintain consistent performance over time.

You can clean your molds by hand with soap, in the dishwasher, or through steam cleaning following CDC Sterilization Guidelines (3-4 minutes at 270°F-277°F).

After washing, air dry the molds or use a lint-free cloth. You can also speed up drying with a low-heat oven. Avoid paper towels to prevent lint.

Check Out Our Blog for More Tips!

All Vector Molds are manufactured using premium, food-grade, BPA-free platinum silicone that is laboratory tested for safety and consistency.

This high-performance material provides a naturally non-stick surface and is designed to maintain its shape, durability, and product integrity across repeated production cycles.

Yes. Our molds are designed for commercial production and are compatible with many manufacturing machine systems, depositor machines, and copacker production lines used for gummy, candy, chocolate, and supplement manufacturing.

Yes. We offer in-stock gummy molds designed to fit standard universal depositor machines with 8-nozzle configurations, making them ideal for both small-scale and high-volume production. These molds are also suitable for hand-pouring and flood-and-scrape methods.

In addition, we specialize in custom silicone molds tailored to fit virtually any depositor or production line. Our team has experience working with equipment from Infuzing, Baker Perkins, Truffle, Evocan, TAG Pharma, and more.

If you’re using a specific machine, simply send us your depositor specs or nozzle layout—we’ll design a mold that ensures proper alignment, consistent fills, and smooth production.

Depositor compatible silicone molds are molds specifically engineered to work with commercial gummy manufacturing machines and automated depositor systems. These molds are designed for efficient filling, easy demolding, repeatable volume control, and large-scale production environments.

At Vector Molds, precision is our priority. Every single cavity is strictly CNC-machined to exact specifications rather than cast from generic templates. This rigorous engineering process guarantees exact volume, ensuring accurate dosage and a consistent product weight across all our cavities and gummy candy molds. Whether you need standard shapes or complex custom gummy molds, you can rely on absolute uniformity for every pour.

Our molds are engineered for fast, clean release using precision CNC machining with advanced 2026 tooling. This process creates ultra-smooth, machine-polished cavities and optimized geometry that help reduce sticking and improve consistency.

The result is a naturally non-stick silicone mold that supports quicker demolding, cleaner edges, and more efficient production—whether you're making gummies, chocolates, or other confections.

Yes. Our commercial-grade silicone molds are engineered for durability, repeatable production, and daily manufacturing use in demanding production environments.

Our Silicone Molds are compatible with gelatin, pectin, and agar-based gummy recipes. Final texture and firmness will depend on your formulation, including sugar content, solids, and cooking temperature.

You can adjust factors like gelatin bloom strength or pectin percentage to fine-tune texture, consistency, and set time for your specific production needs.

Vector Molds are designed to handle a wide temperature range from approximately -40°F to 446°F (-40°C to 230°C). They are safe for use in freezers, refrigerators, and standard ovens.

This makes them ideal for gummy, chocolate, and confectionery production—especially processes that require repeated heat-to-cold cycles. The material is built to perform consistently as products move from depositing temperatures to cooling and setting.

Yes, Vector Molds are dishwasher safe, and we recommend placing them on the top rack.

After washing, allow the molds to air dry completely. This helps maintain the non-stick surface and ensures consistent performance across repeated production cycles.

For best results and long-term performance, hand-washing with warm water and a mild, oil-cutting soap is ideal.

After washing, allow the molds to air dry completely. This helps maintain the non-stick surface and ensures consistent performance across repeated production cycles.

For detailed cleaning guidance, we recommend reading our blog: Maintaining Your Silicone Molds.

If you have specific questions or need help with your process, feel free to contact our team—we’re happy to help.

Our custom food-grade silicone molds are commonly used for commercial gummy manufacturing, candy production, chocolate molding, nutraceutical and supplement production, confectionery processing, and large-scale copacker manufacturing environments.

Yes. All Vector Molds are made from premium, food-grade, BPA-free platinum silicone. They are compliant with FDA 21 CFR 177.2600 standards and safe for commercial food production.

Yes, Vector Molds specializes in custom gummy molds and custom silicone molds designed for commercial production. Our process includes design, prototyping, and full-scale manufacturing to ensure your mold performs exactly as needed.

Projects begin with a $925 design deposit, which covers CAD design and sample mold production. This allows you to test shape, weight, and recipe performance before moving into full production. Once approved, the deposit is applied toward your final order.

Typical lead times are 7–14 days for sample molds, depending on design complexity. To learn more about how it works, we recommend visiting our Custom Mold Process page for a full step-by-step breakdown.

If you have a concept, logo, or specific requirements, send us your details and our team will help bring your mold to life.

Absolutely. We can customize cavity layouts, nozzle spacing, mold dimensions, cavity count, and production configurations to match your depositor machine, manufacturing workflow, and copacker requirements.

To optimize your mold design, you can request:

• Machine brand and model
• Nozzle count and spacing
• Desired cavity volume
• Product shape or logo
• Packaging dimensions
• Production goals or workflow details

Yes. We regularly manufacture custom silicone molds for copackers and contract manufacturing companies that produce, package, and distribute products for retail brands.

Yes. We can engineer molds to fit tins, trays, pouches, bags, clamshells, cartons, retail boxes, and other packaging formats to help simplify packaging and labeling workflows.

Yes. We specialize in custom logo molds and detailed cavity designs that help products stand out while maintaining clean definition and production efficiency.

Yes. Our molds are engineered for commercial manufacturing workflows, recipe scaling, repeatable production, and large-scale production environments.

Absolutely. We can customize layouts, nozzle alignment, cavity spacing, and mold configurations to help improve depositing, production speed, packaging efficiency, and overall manufacturing performance.

Absolutely. We can engineer custom molds around your machine brand, nozzle layout, cavity spacing, production dimensions, and manufacturing workflow. Simply provide your machine information and our team will handle the rest.